Classroom Capture (CCAP) is a Windows-only software program that can be downloaded and installed on the PC resident in a classroom. It effectively turns the computer into a capture device, where the installed CCAP software and the attached cameras and microphones are used to capture classroom lectures.
See Supported Devices for CCAP and PCAP Windows for information on supported capture input devices.
See Classroom Capture for Administrators or Classroom Capture for Instructors as appropriate, for information on installation, configuration, and use of CCAP.
If you are planning to use a CCAP Installation for Live streamed classes, please refer to Using CCAP for Live Streaming first.
Note that you CANNOT install both CCAP and PCAP on the same PC; the installer will fail if it finds an instance of the other already installed.
Finally, understand that while they may meet or exceed the below-listed system requirements, CCAP is not supported for use on netbooks or on "hybrid" laptop (laptop/tablet) computers.
The following are the minimum specifications for a Classroom Capture PC:
NOTE: Capturing CPU or memory-intensive applications such as CAD or 3D modeling software may require a more capable computer.
Audio MUST be captured. You can use the built-in sound card input, or 1/8" line-in/mic-in connection, or USB-based audio or capture device (including a microphone on an attached video camera, if there is one). Audio levels should be configured on the input to be as high as possible without reaching maximum levels during peaks, which can cause audible distortion during recording.
Display is captured from the local VGA screen buffer, and requires no external connection or configuration.
Video can be captured using the built in camera on the classroom PC or via a USB-attached video camera.
See Supported Devices for CCAP and PCAP Windows for lists of supported and tested devices.
Classroom Capture supports the following input combinations:
Classroom Capture can generate the following output: