Common Settings - Device Defaults
All capture appliances have settings common to all devices.
These include identifying the time server being used to keep the devices
in sync, and the generic logins that can be used to access the devices
through the Device Web UI.
While initially configured on the Device default configurations
page, these settings, like all other device settings, can be changed on
individual devices via the ROOMS page.
To configure common device settings
- Log into Echo360 as an administrator.
- Click the Settings
icon in the upper right corner of the page (it looks like a gear).
- Select Configurations
from the settings menu.
- From the left side of the Configurations
page, click Device default configurations.
- Select Common
Settings from the top of the page.
- The Local
administrator login and Local
instructor login are automatically populated with generic usernames
and passwords for each ("admin" or "instructor"
Enter different values for each, enabling the Show
Password slider if needed.
The values entered can be used to log into any device to which this
device configuration is applied.
- Select which Protocol
or Protocol/Port combination you want the devices to use for communication
and capture upload.
- Select whether you want the device to use
an Outbound Proxy.
- If an outbound proxy is selected, enter the
Host and Port
for the proxy, and the Username/Password to use for Authentication
if appropriate (fields shown in above figure).
- When finished, click SAVE.
- To save your updated device configuration
file to a USB thumb drive, click DOWNLOAD.
You can now insert the thumb drive into any capture device to apply
these configurations to the device.